MaxLifetimeWithoutAnyPlayerInteraction": 432000, // lifetime for how long a car can sit around without having a key assigned; it can be same as MaxLifetime if you wish - in seconds For these purposes, a nail of 100 mm is best suited. It should be bent into a U-shape so that the ends fit freely into the holes of the clamping flange. After the short amount of time I've had mine I wouldn't hesitate to recommend it to the right person. It's not aimed exactly at the Niche User IMO, so trying to draw a direct comparison isn't exactly fair.

Then place the tip of a thin chisel at an angle to the hole of the flange nut and gently tap the entire surface of the hole with a metal hammer.

In what direction to mount a diamond disc on a angle grinder?

CanPlayersResetKey": 1 // 1- this allows players to reset their own vehicle's key. can be useful when trading to invalidate any old copies. Put 0 if you don't want your players to have this ability There are several ways to remove an angle grinder disc, depending on the tools you have. The simplest method is to use the included factory keys. However, if you bought your used angle grinder and the keys are missing, there are other ways to remove an angle grinder disc without a tool. The main thing is that when changing a disc on a grinder, do not violate safety precautions and remove the disc with the angle grinder turned off. Connect the grinder to the spindle shaft for 30 seconds at maximum speed. If the disc rotates freely, without beating, without touching the protective casing, you can start working.

So far, with the Key, I've been grinding into the "standard Tumbler" then I pull the plug and WDT through the hole in the Tumbler. This has been pretty smooth, but I seem to get more channeling and sprayers around the perimeter of the basket. SO, I've experimented with using a funnel in between the Standard Tumble-r and the basket. This has been a little better, but not where I want it yet. With the Niche I rarely had channeling or sprayers. So, I'm going to give it a try next with the Magic Tumbler and a funnel. MaxLifetime": 1296000, // you should put maximum you ever want cars to be sitting around - in secondsSooner or later, thanks to mild tapping, the nut will be removed, and it will be possible to unscrew it manually. This method is similar to the previous one, only you can use a suitable metal rod or chisel. After fixing the spindle head, tap along the edges of the clamp holes in the direction of movement of the circle. Grinders are handheld power tools that are used for grinding, shaping and polishing a wide range of materials such as concrete, metal, and stone. A grinder has a motor that drives a spinning abrasive disc or wheel with grit particles on it. When applied to a workpiece the rotating disc removes material to create the desired shape or surface. Types of Grinder